I lost volume about 2 months ago on the TV but not the sound bar.

... Sound Bars. Sometimes, the sound may work when you use headphones. My issue is that I cannot change the volume on the remote. Weak Batteries: After some time the batteries inside the remote start to lose their energy and become unstable after which they might cause issues with properly powering the remote.
So, I have a 50” Vizio flat screen with a sound bar. Try searching by volume, with the receiver off, tv on, volume up but muted, do the following on the remote: 1. tv 2. press and hold MUTE & SELECT for two blinks, release 3. enter 9 9 1, wait two blinks 4. enter 1 5. press and release VOL UP 6. point the remote at the tv and keep pressing and releasing the CH UP key, if and when the volume changes I unplugged my sound bar and started trying different things. My tv never lost volume, you just had to turn it up to 60 before you could hear it. How to Scan for Antenna Channels on Your TV.

This section is not written yet.

A display on screen should show if the TV is now muted, or not.

fios told me all i have to do is press "tv" and "volume" same time and it will work. 1 Check Mute Push the Mute button on your TV remote.

On the cable remote (upper left corner right above the yellow triangle) click Settings, scroll down to Devices hit ok, then a Settings menu appears, select Audio Output Format, then select HDMI or whatever you'd like the sound to play from. Setting up an Element Smart TV. my remote volume will stop working after a while and i always would reprogram it.

Setting up an Element TV. Any remote control can be use on the TV, same brand, my TV is elemental modelElefw328B . If the sound doesn’t work, it confirms the problem. Want to join in? If you have recently bought a universal remote control and you need the remote codes to operate your Element TV, we have codes below for your TV that should be working.

Registering Your Element Product. How can I program my universal remote to element TV?

FAQs.

To verify this, you need to unmute the TV, turn up the volume and then reset it. VisiHow QnA. Re: Power and Volume not responding. Next, unplug the component from power. Plug the component back into power and attempt to power it back on. If the first does not work keep trying the numbers down the list. This section is not written yet. Learn More Click EDIT to write this answer. Need a hand troubleshooting your Element TV? If that doesn't work, try raising the volume on your TV. Element TV remote codes When using the remote codes below, you … Remote Control Codes For Element TVs Read More » Weak Batteries: After some time the batteries inside the remote start to lose their energy and become unstable after which they might cause issues with properly powering the remote. Wait at least 30 seconds. If the Remote is not properly Synced to the TV it can sometimes interfere with the Volume control feature and prevent it from working properly. Click below to get started. If the Remote is not properly Synced to the TV it can sometimes interfere with the Volume control feature and prevent it from working properly. We’re ready to help. Contact Support.