Fixing A Dead Head Stuck Sewing Machine.

Regular user maintenance and annual sewing machine service are essential. Turn your serger off, or at least make sure your foot is NOWHERE near the pedal! Serger machines are mostly used to prevent the raw edges of fabrics from fraying. You don’t want to slice off your finger! To start, put each spool of thread on the back of your serger. It is being provided by “ Sew What’s Up ,” which serves as the new home for many members of “Sew What’s New.” Unlike most electronic sewing machines, I’ve never heard of a serger that can be set to always stop with the needle(s) down. Suitably maintained sewing machines give sewers astonishingly creative performance for decades. Your sewing machine won’t work if you forget to move the bobbin winder spool pin back to its original position after winding a bobbin. My serger needs me to unscrew a body piece right above the lower loopers tensions disk, and put a couple of drops of oil in that joint. Needle will not move up or down Aug 07, 2019 12:03:38 PM Category: Sewing Machine Troubleshooting Guide 18937 Views. The Sew What’s New Archive This archived content is from Mary Wilkins’ sewing and quilting message board “Sew What’s New,” which was retired in August 2007. Some models have tiny holes around their body: usually they’re used for oiling joints hidden inside but, again, refer to your manual or dealer: if you aren’t supposed to put oil in a certain place, stay sure that it won’t be pleased for being oiled! Just move it back and your sewing machine should start working again.

1. They also have built it features like the rolled hem serger stitch that is used to finish the edges of delicate fabrics with a much smaller stitch. Set the needles into the highest position (by manually turning the handwheel) Now, let’s learn how to Thread Your Serging Machine! Needle down. To remove a needle from the serger, just insert your needle’s point in the hole of the inserter to hold the needle while you un-screw it from the serger: this way it won’t get lost inside the machine! What is a Serger Machine used for? There are many reasons as to why the sewing machine needle will not move. Click on any part to get more information including a complete listing of compatible sewing machines and alternate part numbers for a specific hand wheel … The White sewing machine is a staple product of the White sewing machine company, a Massachusetts-based firm that has been manufacturing sewing machines for over 150 years. They prevent the undue collection of debris and gunk. Older sewing machines typically have an inner wheel on the handwheel … Here you will find a large selection of sewing machine hand wheels and clutches. A number of types in the line of White products are available, all sewing machines for different purposes. Welcome to our sewing machine hand wheels and clutches page.