So, let’s have a look at them. 1. SOLAS onboard drill requirements ... 3.3.3 Except as provided in paragraphs 3.3.4 and 3.3.5, each lifeboat shall be launched with its assigned operating crew aboard and manoeuvred in the water at least once every three months during an abandon ship drill. Lifeboat Exterior, Lifeboat internal, Lifeboat Engine, Lifeboat Release gear, Lifeboat Davit and Lifeboat Winch. MGN 560 Servicing, testing, drilling of Lifeboats, Rescue boats Compiles current guidance on safe servicing, testing maintenance and drilling of lifeboats… This first pass prescribed numbers of lifeboats and other emergency equipment along with safety procedures, such as continuous radio watches. SOLAS and LSA code Requirements for lifeboat:-The size, number and the capacity of the lifeboat for a merchant vessel is decided by the type of the ship and number of ship’s crew, but it should not be less than 7.3 m in length and minimum two lifeboats are provided on both side of the ship (port and starboard). The inner diameter should not be less than 400 mm and the outer diameter should not be more than 800 mm. So, let’s have a look at them. There are various lifebuoy requirements as per SOLAS and LSA Code. Annual thorough examination of lifeboat All lifeboats shall be provided with a rudder and tiller. All lifeboats shall be fitted with sufficient watertight lockers or compartments to provide for the storage of the small items of equipment, water and provisions. Many countries have turned these international requirements into national laws so that anybody on the sea who is in breach of SOLAS V requirements may find themselves subject to legal proceedings. SOLAS requirements divides thorough inspection by shore in two parts.

1) Lifeboat on each side should be able to accommodate total number of crew in single lifeboat itself. 1) Thorough inspection of lifeboat. The inner diameter should not be less than 400 mm and the outer diameter should not be more than 800 mm. 2) The amount of fuel inside the lifeboat should be enough to sail for a period of 24 hours and at a speed of 6 knots. (www.MaritimeCyprus.com) From 1 January 2020, maintenance, thorough examination, operational testing, overhaul and repair of the following items shall be carried out in accordance with the IMO Resolution MSC.402(96). There are various lifebuoy requirements as per SOLAS and LSA Code. The rudder shall be permanently attached to the lifeboat. In the Gulf of Mexico the average weight of an offshore worker may be as much as 95 kilos. (www.MaritimeCyprus.com) From 1 January 2020, maintenance, thorough examination, operational testing, overhaul and repair of the following items shall be carried out in accordance with the IMO Resolution MSC.402(96). Here in this article we have compiled all the requirements at one place. It was clear that there needed to be better not only oversight, but research into safety at sea, so in 1914, as a response to this disaster, The International Convention for the Safety of Life at Sea (SOLAS) was drafted. 1) Lifeboat on each side should be able to accommodate total number of crew in single lifeboat itself.

Here in this article we have compiled all the requirements at one place. The Company shall establish and implement health, safety and environment (HSE) procedures covering all activities set out in these Requirements. Requirements and SOLAS regulation III/20. The SOLAS regulations require that the capacity of lifeboats be determined using a weight per seafarer of 75 kilos, which may be pretty fair for the average Filipino, but the HSE in UK carried out a study which determined that the average weight of an offshore worker was in fact 89 kilos. 2) The amount of fuel inside the lifeboat should be enough to sail for a period of 24 hours and at a speed of 6 knots.

Solas requirement for lifeboat on ship. Related Article: Thermal Protective Aid - Requirements as per SOLAS. Man Overboard lifebuoy’s mass should not be more than 4 Kg.

Solas requirement for lifeboat on ship. 2) Thorough inspection of Launching appliances. Mass of the lifebuoy should not be less than 2.5 Kg.